Skip to content
barbell jump squat strength standards

What is a good barbell jump squat?

For a 180 lb male, an Intermediate barbell jump squat is about 146 lb (0.81x bodyweight). Advanced starts around 187 lb. Enter your own bodyweight below to get the exact standard and FVCP rank.

Good target 146 lb Intermediate at 180 lb
Next tier 187 lb Advanced standard
Gym median Separate tab Self-reported, not blended
Check My Level Estimate Your 1RM Methodology
Evidence ledger No blended rankings
Primary source FitnessVolt standards model
Available views Standards
Coverage 21 bodyweights × 5 levels

Competition results, gym submissions, and reader logs stay labeled separately so the ranking source is clear.

Quick Answer barbell jump squat

A solid (Intermediate) barbell jump squat for a 180 lb male is about 146 lb (0.81x bodyweight). Use the calculator below to convert your own barbell jump squat into an FVCP percentile for your bodyweight. An Advanced lifter at this weight reaches 187 lb (1.04x bodyweight).

FitnessVolt standards, with FVCP competition rankings shown separately from gym percentiles

barbell jump squat demonstration
Estimated Standards

How strong is your barbell jump squat? Compare your 1RM against standards for 21 bodyweight categories, from Beginner to Elite.

Primary Muscles glutes
Equipment barbell
Standards Coverage 21 bodyweights × 5 levels
Difficulty Advanced
Type Compound

Estimated Standards - The level table for this exercise is modeled from FitnessVolt strength ratios for a related base lift, not from direct measurements of this movement. Learn about our methodology

How Strong Is Your barbell jump squat?

Intermediate (competition scale)
Typical FVCP: 50th percentile
A 180 lb male lifting 146 lbs (0.81x bodyweight) on the barbell jump squat ranks Intermediate on the FVCP competition scale, stronger than ~50% of verified competition lifters at this bodyweight. Enter your own numbers above to see where you stand.

That clears the median for this bodyweight and gives you a useful benchmark for the next tier.

Over 40? Our calculator also reports an age-adjusted percentile and an age-30 equivalent using the McCulloch age factor, so masters lifters are compared to lifters their own age. See the age-adjusted (Masters 40+) standards below for the full breakdown.

FVCP competition ranking, shown separately from gym percentiles and reader logs
Your FVCP:
Age-adjusted percentile
lb Age-30 equivalent 1RM

FVCP competition ranking, shown separately from gym percentiles and reader logs
th percentile

Illustrative: a normal-distribution model anchored to the real Beginner to Elite percentile thresholds for your bodyweight. The marker shows where your lift falls, not a measured frequency count.

Help improve accuracy for everyone
Share your FVCP with friends
Thanks for contributing! lifters have shared their data for this exercise.
to track your progress over time.

Reader Data Is Still Building

We do not have enough reader-submitted barbell jump squat entries yet to publish a stable crowd benchmark. Until then, this panel shows the Intermediate standards baseline only:

146 lb Typical 1RM (Intermediate)
0.81x x Bodyweight

Baseline figures for a 180 lb male at Intermediate level, from the standards table. This is not reader-submitted data. So far readers have logged a lift here.

Enter your numbers above first. We publish reader benchmarks only after a sample threshold is met.

How Much Should You barbell jump squat?

Use this table to find the standard closest to your bodyweight. The tiers are standards, not claims about reader submissions.

How a male lifter's expected 1RM scales with bodyweight at each level. Exact numbers in the table below.

BW (lbs) Beginner Novice Intermediate Advanced Elite
110 37 57 84 115 149
120 44 66 94 126 162
130 50 74 103 137 175
140 57 81 112 148 187
150 63 89 121 158 198
160 69 96 130 168 209
170 75 104 138 178 220
180 81 111 146 187 230
190 87 118 154 196 240
200 93 124 162 204 250
210 99 131 169 213 259
220 105 137 177 221 268
230 110 144 184 229 277
240 115 150 191 237 285
250 121 156 198 244 293
260 126 162 204 252 302
270 131 168 211 259 309
280 136 173 217 266 317
290 141 179 223 273 325
300 146 184 230 280 332
310 151 190 235 286 339

Is Your barbell jump squat Good?

A quick read on what counts as a good barbell jump squat at each level, for a typical male and female lifter.

Men (180 lb): a good (Intermediate) barbell jump squat is about 146 lb (0.81x bodyweight). Advanced lifters hit 187 lb (1.04x), and Elite is 230 lb (1.28x).

Women (140 lb): a good (Intermediate) barbell jump squat is about 80 lb (0.57x bodyweight). Advanced lifters hit 111 lb (0.79x), and Elite is 145 lb (1.04x).

How Much Should You Be Able to barbell jump squat?

Men: a 180 lb male should lift about 146 lb at an Intermediate level (a beginner target is around 81 lb).

Women: a 140 lb female should lift about 80 lb at an Intermediate level (a beginner target is around 34 lb).

By bodyweight (men): A 150 lb lifter lifts about 121 lb, and a 220 lb lifter lifts about 177 lb at an Intermediate level. Find your exact bodyweight in the table above.

By age (men): at an Intermediate level a 30 year old male lifts about 144 lb, while by age 50 the Intermediate standard is about 128 lb. See the By Age tab for every age band.

FitnessVolt standards, with FVCP competition rankings shown separately from gym percentiles

How Does Age Affect barbell jump squat Strength?

How barbell jump squat standards change across different age groups. Values represent a 1RM in lbs.

How a male lifter's expected 1RM changes with age at each level. Exact numbers in the table below.

Age Beginner Novice Intermediate Advanced Elite
15 60 88 122 162 206
20 69 101 140 186 236
25 71 103 144 191 242
30 71 103 144 191 242
35 71 103 144 191 242
40 71 103 144 191 242
45 67 98 136 181 229
50 63 92 128 170 215
55 58 85 118 157 199
60 53 78 108 143 182
65 48 70 98 130 164
70 43 63 88 116 147
75 39 56 78 104 132
80 35 50 70 93 118
85 31 45 63 83 106
90 28 41 57 75 95

What Do barbell jump squat Strength Standards Mean?

Beginner

Stronger than 5% of lifters. You are learning to hit proper depth on the barbell jump squat, building ankle and hip mobility, and developing the bracing pattern needed to keep your torso upright under load.

Novice

Stronger than 20% of lifters. You can execute the barbell jump squat with consistent depth and bracing. You are adding weight session to session using linear progression and building foundational leg strength.

Intermediate

Stronger than 50% of lifters. Your barbell jump squat technique is solid through heavy loads. You use periodized programming, understand RPE-based autoregulation, and can grind through sticking points without form breakdown.

Advanced

Stronger than 80% of lifters. You have refined your barbell jump squat stance, bar position, and breathing to maximize leverage. You train with block periodization, manage fatigue across training cycles, and likely compete or train at a competitive level.

Elite

Stronger than 95% of lifters. Your barbell jump squat is at a regional or national competitive standard. You have years of structured peaking cycles behind you and have optimized every technical detail from walkout to lockout.

How to Progress Your barbell jump squat

Tier-specific training recommendations to move your barbell jump squat to the next level.

Beginner → Novice Building Your Foundation
  • Train the barbell jump squat 2x per week, focusing on hitting consistent depth every rep.
  • Use linear progression: add 5 lbs each session as long as form stays solid.
  • Record sets at RPE 6-7 to build volume without excessive fatigue.
  • Prioritize ankle and hip mobility work before each session.
Track progress with the one rep max calculator →
Novice → Intermediate Structured Progression
  • Switch from linear to weekly periodization (e.g., light/medium/heavy days).
  • Add a barbell jump squat variation (pause squats, tempo squats) for weak-point work.
  • Keep most working sets at RPE 7-8, with occasional top singles at RPE 9.
  • Start tracking your training volume (sets x reps x load) week to week.
Plan your RPE-based sessions →
Intermediate → Advanced Periodized Training Blocks
  • Run 4-6 week training blocks with planned intensity peaks and deloads.
  • Use RPE 8-9 for primary sets, RPE 7 for backoff volume.
  • Address specific sticking points with targeted accessory work.
  • Manage fatigue: total weekly sets of 12-20 for the barbell jump squat movement pattern.
Program your backoff sets →
Advanced → Elite Competition-Level Peaking
  • Run structured peaking cycles (8-12 weeks) leading to maximal attempts.
  • Fine-tune technique details: walkout, descent speed, breath timing.
  • Use the RPE chart to hit precise percentages during peaking blocks.
  • Consider competing to test your barbell jump squat under meet conditions.
View RPE-to-percentage chart →

How to Perform barbell jump squat

["Start by standing with your feet shoulder-width apart, holding a barbell across your upper back.","Lower your body into a squat position by bending your knees and pushing your hips back.","Once you reach the bottom of the squat, explode upwards by jumping off the ground.","As you jump, extend your hips, knees, and ankles, pushing through your toes.","Land softly back into the squat position and immediately repeat the movement for the desired number of repetitions."]

Read the complete barbell jump squat guide on FitnessVolt →

Where Do These barbell jump squat Standards Come From?

FitnessVolt keeps each data population labeled. Competition percentiles use verified raw meet results where available. Gym percentile tabs use self-reported Symmetric Strength data. Reader-submitted benchmarks appear only after enough entries are logged for this lift.

Standards data last refreshed: March 29, 2026

Is Your barbell jump squat Good for Your Weight?

Use this page to compare your barbell jump squat against clearly labeled standards and percentile datasets. Here is the cleanest way to read it:

  1. Start with Standards to find the tier closest to your bodyweight.
  2. Use Gym Percentiles when you want self-reported gym comparisons.
  3. Use Competition for verified meet-result percentiles where the lift supports it.
  4. Use By Age when age-segmented gym data is available.

If you do not know your 1RM, use the one rep max calculator to estimate it from any rep set. For example, if you can barbell jump squat 185 lbs for 5 reps, the calculator will estimate your max.

The important rule: do not mix the tabs. Standards, gym percentiles, competition percentiles, and reader logs answer different questions.

Frequently Asked Questions

A "good" barbell jump squat depends on your bodyweight, sex, and training background. The Intermediate tier is a useful first serious target, while Advanced and Elite represent much harder standards. Use the table above for the number closest to your bodyweight.
Many lifters can reach the Intermediate tier on the barbell jump squat after steady training, but the timeline depends on starting point, technique, programming, recovery, and bodyweight changes. Treat the tier as a benchmark, not a deadline.
Yes. Competition views use verified meet-result data where available, gym percentile views use self-reported gym cohorts, and reader-submitted benchmarks are shown only after enough entries are logged. The populations are labeled separately.
For weighted lifts, enter a clean raw 1RM or an estimated 1RM from a recent hard set. For rep-based movements, enter controlled full-range reps. Avoid equipped lifts, partial reps, or bounced reps unless you are comparing against the same style every time.

Related Exercise Standards

Related Calculators

One Rep Max Calculator Estimate your one-rep max from any rep set Benchmarks Compare against competition data RPE Chart Training load percentages by RPE
Written by Tom Miller, CSCS · Reviewed by Editorial Team
Tom Miller, CSCS, is a Sr. Editor & Content Strategist with 10 years of experience in Powerlifting and Personal Training. As a Certified Strength and Conditioning Specialist, he is dedicated to delivering informative, engaging, and reliable health and fitness content. His work has been featured on websites including the-sun.com, Well+Good, Bleacher Report, Muscle and Fitness, UpJourney, Business Insider, NewsBreak and more.