Skip to content
dumbbell lying hammer press strength standards

What is a good dumbbell lying hammer press?

For a 180 lb male, an Intermediate dumbbell lying hammer press is about 84 lb (0.47x bodyweight). Advanced starts around 108 lb. Enter your own bodyweight below to get the exact standard and FVCP rank.

Good target 84 lb Intermediate at 180 lb
Next tier 108 lb Advanced standard
Gym median Separate tab Self-reported, not blended
Evidence ledger No blended rankings
Primary source FitnessVolt standards model
Available views Standards
Coverage 21 bodyweights × 5 levels

Competition results, gym submissions, and reader logs stay labeled separately so the ranking source is clear.

Quick Answer dumbbell lying hammer press

A solid (Intermediate) dumbbell lying hammer press for a 180 lb male is about 84 lb (0.47x bodyweight). Use the calculator below to convert your own dumbbell lying hammer press into an FVCP percentile for your bodyweight. An Advanced lifter at this weight reaches 108 lb (0.6x bodyweight).

FitnessVolt standards, with FVCP competition rankings shown separately from gym percentiles

dumbbell lying hammer press demonstration
Estimated Standards

How strong is your dumbbell lying hammer press? Compare your 1RM against standards for 21 bodyweight categories, from Beginner to Elite.

Primary Muscles pectorals
Equipment dumbbell
Standards Coverage 21 bodyweights × 5 levels
Difficulty Intermediate
Type Compound

Estimated Standards - The level table for this exercise is modeled from FitnessVolt strength ratios for a related base lift, not from direct measurements of this movement. Learn about our methodology

How Strong Is Your dumbbell lying hammer press?

Intermediate (competition scale)
Typical FVCP: 50th percentile
A 180 lb male lifting 84 lbs (0.47x bodyweight) on the dumbbell lying hammer press ranks Intermediate on the FVCP competition scale, stronger than ~50% of verified competition lifters at this bodyweight. Enter your own numbers above to see where you stand.

That clears the median for this bodyweight and gives you a useful benchmark for the next tier.

Over 40? Our calculator also reports an age-adjusted percentile and an age-30 equivalent using the McCulloch age factor, so masters lifters are compared to lifters their own age. See the age-adjusted (Masters 40+) standards below for the full breakdown.

FVCP competition ranking, shown separately from gym percentiles and reader logs
Your FVCP:
Age-adjusted percentile
lb Age-30 equivalent 1RM

FVCP competition ranking, shown separately from gym percentiles and reader logs
th percentile

Illustrative: a normal-distribution model anchored to the real Beginner to Elite percentile thresholds for your bodyweight. The marker shows where your lift falls, not a measured frequency count.

Help improve accuracy for everyone
Share your FVCP with friends
Thanks for contributing! lifters have shared their data for this exercise.
to track your progress over time.

Reader Data Is Still Building

We do not have enough reader-submitted dumbbell lying hammer press entries yet to publish a stable crowd benchmark. Until then, this panel shows the Intermediate standards baseline only:

84 lb Typical 1RM (Intermediate)
0.47x x Bodyweight

Baseline figures for a 180 lb male at Intermediate level, from the standards table. This is not reader-submitted data. So far readers have logged a lift here.

Enter your numbers above first. We publish reader benchmarks only after a sample threshold is met.

How Much Should You dumbbell lying hammer press?

Use this table to find the standard closest to your bodyweight. The tiers are standards, not claims about reader submissions.

How a male lifter's expected 1RM scales with bodyweight at each level. Exact numbers in the table below.

BW (lbs) Beginner Novice Intermediate Advanced Elite
110 20 32 48 66 86
120 24 37 53 73 94
130 28 41 59 79 101
140 32 46 64 85 108
150 35 51 69 91 115
160 39 55 74 97 121
170 43 59 79 103 128
180 46 63 84 108 134
190 49 67 89 113 139
200 53 71 93 119 145
210 56 75 98 124 151
220 59 79 102 128 156
230 63 82 106 133 162
240 66 86 111 138 166
250 69 90 114 142 171
260 72 93 119 147 176
270 75 97 122 151 181
280 78 100 126 155 185
290 81 103 130 159 190
300 84 106 133 163 194
310 87 110 137 167 199

Is Your dumbbell lying hammer press Good?

A quick read on what counts as a good dumbbell lying hammer press at each level, for a typical male and female lifter.

Men (180 lb): a good (Intermediate) dumbbell lying hammer press is about 84 lb (0.47x bodyweight). Advanced lifters hit 108 lb (0.6x), and Elite is 134 lb (0.74x).

Women (140 lb): a good (Intermediate) dumbbell lying hammer press is about 41 lb (0.29x bodyweight). Advanced lifters hit 59 lb (0.42x), and Elite is 79 lb (0.56x).

How Much Should You Be Able to dumbbell lying hammer press?

Men: a 180 lb male should lift about 84 lb at an Intermediate level (a beginner target is around 46 lb).

Women: a 140 lb female should lift about 41 lb at an Intermediate level (a beginner target is around 15 lb).

By bodyweight (men): A 150 lb lifter lifts about 69 lb, and a 220 lb lifter lifts about 102 lb at an Intermediate level. Find your exact bodyweight in the table above.

By age (men): at an Intermediate level a 30 year old male lifts about 82 lb, while by age 50 the Intermediate standard is about 73 lb. See the By Age tab for every age band.

FitnessVolt standards, with FVCP competition rankings shown separately from gym percentiles

How Does Age Affect dumbbell lying hammer press Strength?

How dumbbell lying hammer press standards change across different age groups. Values represent a 1RM in lbs.

How a male lifter's expected 1RM changes with age at each level. Exact numbers in the table below.

Age Beginner Novice Intermediate Advanced Elite
15 33 50 70 94 120
20 38 57 80 108 138
25 39 59 82 111 141
30 39 59 82 111 141
35 39 59 82 111 141
40 39 59 82 111 141
45 37 55 78 105 134
50 35 52 73 98 126
55 32 48 68 91 116
60 30 44 62 83 106
65 27 40 56 75 96
70 24 36 50 67 86
75 21 32 45 60 77
80 19 29 40 54 69
85 17 25 36 48 62
90 16 23 32 44 55

What Do dumbbell lying hammer press Strength Standards Mean?

Beginner

Stronger than 5% of lifters. You are learning dumbbell stabilization and control on the dumbbell lying hammer press, building the shoulder stability and pressing coordination needed to handle heavier loads safely.

Novice

Stronger than 20% of lifters. You can press with a consistent path and controlled tempo on the dumbbell lying hammer press. You are progressing linearly and building the chest, shoulder, and tricep base needed for intermediate strength.

Intermediate

Stronger than 50% of lifters. Your dumbbell lying hammer press technique is efficient under heavy loads. You use programmed variations, understand how to manage pressing fatigue, and can grind through the mid-range sticking point.

Advanced

Stronger than 80% of lifters. You have optimized your dumbbell lying hammer press setup for maximal force production - arch, leg drive, and grip width are dialed in. You train with periodized intensity blocks and accessory work targeting weak points.

Elite

Stronger than 95% of lifters. Your dumbbell lying hammer press is at a competitive standard. You have refined every aspect of the lift through years of structured peaking and can produce maximal force with technical precision.

How to Progress Your dumbbell lying hammer press

Tier-specific training recommendations to move your dumbbell lying hammer press to the next level.

Beginner → Novice Building Your Foundation
  • Train the dumbbell lying hammer press 2-3x per week to build pressing strength and shoulder stability.
  • Use linear progression: add 2.5-5 lbs per session.
  • Practice controlled eccentrics (3-second lowering) to build tendon strength.
  • Keep working sets at RPE 6-7 to accumulate quality volume.
Track progress with the one rep max calculator →
Novice → Intermediate Structured Progression
  • Add a pressing variation (close-grip, incline, or paused) for weak-point development.
  • Increase frequency to 2-3 sessions per week with varied rep ranges.
  • Program most sets at RPE 7-8 with one heavy session including RPE 9 work.
  • Build tricep and shoulder accessory volume to support the dumbbell lying hammer press.
Plan your RPE-based sessions →
Intermediate → Advanced Periodized Training Blocks
  • Run 4-6 week blocks with planned volume and intensity progression.
  • Use RPE 8-9 for competition-style sets, RPE 7 for volume backoffs.
  • Target your sticking point with specific accessory work (board press, pin press, bands).
  • Manage total weekly pressing volume (12-20 sets) across all push movements.
Program your backoff sets →
Advanced → Elite Competition-Level Peaking
  • Peak with structured 8-12 week cycles targeting a competition or max attempt.
  • Refine your setup: arch, leg drive, grip width, and bar path for maximal efficiency.
  • Use the RPE chart for precise percentage work during peaking phases.
  • Test your dumbbell lying hammer press under competition-style commands and judging.
View RPE-to-percentage chart →

How to Perform dumbbell lying hammer press

["Lie flat on a bench with a dumbbell in each hand, palms facing each other and arms extended straight up.","Lower the dumbbells to the sides of your chest, keeping your elbows at a 90-degree angle.","Press the dumbbells back up to the starting position, fully extending your arms.","Repeat for the desired number of repetitions."]

Read the complete dumbbell lying hammer press guide on FitnessVolt →

Where Do These dumbbell lying hammer press Standards Come From?

FitnessVolt keeps each data population labeled. Competition percentiles use verified raw meet results where available. Gym percentile tabs use self-reported Symmetric Strength data. Reader-submitted benchmarks appear only after enough entries are logged for this lift.

Standards data last refreshed: March 29, 2026

Is Your dumbbell lying hammer press Good for Your Weight?

Use this page to compare your dumbbell lying hammer press against clearly labeled standards and percentile datasets. Here is the cleanest way to read it:

  1. Start with Standards to find the tier closest to your bodyweight.
  2. Use Gym Percentiles when you want self-reported gym comparisons.
  3. Use Competition for verified meet-result percentiles where the lift supports it.
  4. Use By Age when age-segmented gym data is available.

If you do not know your 1RM, use the one rep max calculator to estimate it from any rep set. For example, if you can dumbbell lying hammer press 185 lbs for 5 reps, the calculator will estimate your max.

The important rule: do not mix the tabs. Standards, gym percentiles, competition percentiles, and reader logs answer different questions.

Frequently Asked Questions

A "good" dumbbell lying hammer press depends on your bodyweight, sex, and training background. The Intermediate tier is a useful first serious target, while Advanced and Elite represent much harder standards. Use the table above for the number closest to your bodyweight.
Many lifters can reach the Intermediate tier on the dumbbell lying hammer press after steady training, but the timeline depends on starting point, technique, programming, recovery, and bodyweight changes. Treat the tier as a benchmark, not a deadline.
Yes. Competition views use verified meet-result data where available, gym percentile views use self-reported gym cohorts, and reader-submitted benchmarks are shown only after enough entries are logged. The populations are labeled separately.
For weighted lifts, enter a clean raw 1RM or an estimated 1RM from a recent hard set. For rep-based movements, enter controlled full-range reps. Avoid equipped lifts, partial reps, or bounced reps unless you are comparing against the same style every time.