Learn your one-rep maxes, how they measure up, and how to easily and correctly use them to help you make better progress in your fitness goals.
One Rep Max Calculator
1RM Calculator Guide
One repetition maximum is the biggest weight you can lift per one repetition in a specific exercise. One rep max can also be used to determine the value of your weights in your training set.
For example, if you want to work 12 repetitions, you can recalculate it even if you know the weight required for 4,6, or even 10 repetitions.
For example, you get a program which says you to work on 70% of one rep max. You will have to options – estimate it roughly, or use the table. Max rep calculator is always an easier choice since everything can be done with a very simple proportion. The only way to know the exact value is doing it, that’s for sure, but equation will save you from many possible complications!
Here are benefits of max rep calculator:
- There is no need to burden your muscles;
- Injury risk is significantly decreased;
- You can calculate the approximate values and program your training session more precisely;
- You can get a better overall picture and monitor your progress easier.
One-Rep Max Calculator – Instructions And Recommendations
You need to understand three ways of counting, from three authors – Brzycki, dos Remedios, and Baechle.
% 1RM | Number of repetitions | Brzycki | Baechle | dos Remedios |
---|---|---|---|---|
These are data from three authors. There are differences in the calculations of 1 RM. | 1 | 100 | 100 | 100 |
2 | 95 | 95 | 92 | |
3 | 90 | 93 | 90 | |
4 | 88 | 90 | 87 | |
5 | 85 | 87 | 85 | |
6 | 83 | 85 | 82 | |
7 | 80 | 83 | ||
8 | 78 | 80 | 75 | |
9 | 76 | 77 | ||
10 | 75 | 75 | 70 | |
11 | 72 | |||
12 | 70 | 67 | 65 | |
15 | 65 | 60 |
- Baechle TR, Earle RW, Wathen D (2000). Essentials of Strength Training and Conditioning, 2: 395-425.
- Brzycki, Matt (1998). A Practical Approach To Strength Training. McGraw-Hill.
- Dos Remedios R (2007) Men’s Health Power Training, Rodale Inc. 23.
In bodybuilding, the most important zones are 8-12 repetitions, because it targets hypertrophy oriented strength. Sometimes bodybuilders stick to 15 or even more repetitions, depending on the training goal. This type of training targets muscular endurance.
Level Up Your Fitness: Join our 💪 strong community in Fitness Volt Newsletter. Get daily inspiration, expert-backed workouts, nutrition tips, the latest in strength sports, and the support you need to reach your goals. Subscribe for free!
While 1-5 repetitions are great for maximum strength, 6-8 repetitions are a great choice for the power development.
Learn How To Use Max Rep Calculator – Few Basic Examples
Let’s say you did 12 repetitions with 150 kilograms on a bench press. That means 150 kilograms is 70% of your 1 repetition maximum value (Brzycki). To be able to calculate one repetition maximum, all you need to do is divide those two numbers:
1 RM = weight / percentage = 150 / 0.70 = 214.28 kilograms
You can use a different author for an efficient max calculator too. According to dos Remedios, 12 repetitions mean 65% of one repetition maximum.
x: 150 = 100:65
x = 150 x 100 / 65
x = 230,76 kilograms
Generally, you will notice slight differences, depending on authors. But you can always calculate estimation values.
One more easy calculation, let’s say you know you can perform 8 repetitions with 100 kilograms, but you need to determine the value for 3 repetitions.
According to Baechle, 8 repetitions are 80% of 1 RM, while 3 repetitions are 93% of 1 RM.
You can lift 100 kilograms 8 times. Three repetitions can be calculated via simple proportion:
8 repetitions (percent: weight) = 3 repetitions (percent: weight)
80:100 = 93: x
x = 100*93/80 = 116,25 kilograms
Your one rep max value will depend on the number of your repetitions and the approach you choose between these three. No matter which one you choose, you won’t make a critical mistake.
When it comes to a squat max calculator or deadlift max calculator, the principle is the same. Is there a dependency between max squat calculator and deadlift calculator? No, every exercise is a unit for itself. For example, if you lift 200 kilograms on squat, this might and needn’t mean you will lift 300 kilograms on deadlift. Counting 1 RM for each exercise separately will keep your tracking progress accurate!
Tips to Boost Your Bench Press Max
The bench press is a top method for building power and a solid chest. For experienced lifters, try these strategies to optimize your bench press:
- Use proper form: Lie on your back with a neutral spine, feet flat, and toes straight. Grasp the barbell wider than shoulder-width. Engage abs and retract shoulder blades. Unrack the bar, lower it to your chest, and return to the starting position.
- Try varied set formats: Experiment with different set formats like pyramid sets, where you increase the weight for each set while decreasing reps.
- Increase weight & decrease reps: To enhance maximum lifts, keep a strategic rep range (1-5 repetitions) while lifting near-max or maximal loads (85-100% of one-rep max).
- Train synergists: Focus on strengthening key supporting muscles, such as anterior deltoids, triceps, and rotator cuffs.
Related Calculators:
- Weighted Pull Up Calculator
- Weighted Dips Calculator
- Weighted Muscle Up Calculator
- Back Squat Calculator
- Deadlift Calculator
- Bench Press Calculator
- Wilks Calculator
Final Word
Whether you are a professional lifter or a regular practitioner, you need to be aware of the possibilities of your body. Introduce yourself to the zones, choose your author, and learn to use one rep max calculator properly.
Don’t be too cruel towards yourself – doing 1RM every single day to determine your maximum would seriously harm your body and your training progress. Track your progress regularly, increase your weights as the time goes by, and enjoy transforming your body into Hulk-looking style!
If you have any question or suggestion please let us know in the comments below.
Hello, useful article and tool
1. I have one remark, in the “One Rep Max Results” table, i believe “Repetitions of 1RM” is a little bit confusing, since that column represents repetitions of “percentages of 1RM”, not just “1RM”
2. and something to share, not an issue report: for fun, i managed to get a good approximation of your calculator with this formula:
1RM = Weight_Lifted * (Reps_Performed + 28) / 29
it’s not perfectly matching, but i understand it doesn’t have to be, especially when repetitions are always rounded off (since integers)
resulting in a formula for the recommended repetitions correlated to “Percentage of 1RM” (as under unit fraction):
Repetitions = 29 / Percentage_of_1RM – 28, (rounded off)
seems to work fine, consistent your data, with the highest deviation at 75% (the reason for your Calculator asking for max 10 reps maybe? the 1RM formula was calibrated with the extremes, at 50% and 100%); so guess my question is : is the input limitation to 10 Reps having something to do with the nonlinearity of the formula or is there something more i might be missing?
_____
NOTE: no need to publish this reply, my main incentive was to let you know about the first point, in case it’s really a mistake.
Thank You,
Have a nice weekend!