10 Best Smith Seated Shoulder Press Alternatives for Delt Strength
The Smith machine is busy, or your gym never bolted one down, and the Smith Seated Shoulder Press is off the table today. The closest match is the Lever Shoulder Press, which keeps you seated and pushes the handles up and forward off a backrest, guided by a lever arm instead of a fixed bar. With no lever machine either, the Machine Shoulder (Military) Press holds you in the same seated position on standard equipment.
Original Exercise: Smith Seated Shoulder Press
How to Perform Smith Seated Shoulder Press
- Adjust the seat height so that the handles are at shoulder level.
- Sit on the machine with your back against the pad and your feet flat on the floor.
- Grasp the handles with an overhand grip and lift them off the supports, extending your arms fully.
- Lower the handles down to shoulder level, keeping your elbows slightly bent.
- Press the handles up overhead until your arms are fully extended.
- Pause for a moment at the top, then slowly lower the handles back down to shoulder level.
- Repeat for the desired number of repetitions.
Ranked Smith Seated Shoulder Press Alternatives
1. Lever Shoulder Press V. 3
99.9% MatchHow to perform this exercise
- Adjust the seat height and backrest of the leverage machine to a comfortable position.
- Sit on the machine with your back against the backrest and your feet flat on the floor.
- Grasp the handles of the machine with an overhand grip, slightly wider than shoulder-width apart.
- Push the handles upward and forward until your arms are fully extended, but not locked.
- Pause for a moment at the top, then slowly lower the handles back down to the starting position.
2. Machine Shoulder (Military) Press
99.4% MatchHow to perform this exercise
- Sit down on the Shoulder Press Machine and select the weight.
- Grab the handles to your sides as you keep the elbows bent and in line with your torso. This will be your starting position.
- Now lift the handles as you exhale and you extend the arms fully. At the top of the position make sure that you hold the contraction for a second.
- Lower the handles slowly back to the starting position as you inhale.
- Repeat for the recommended amount of repetitions.
3. Leverage Shoulder Press
98.9% MatchHow to perform this exercise
- Load an appropriate weight onto the pins and adjust the seat for your height. The handles should be near the top of the shoulders at the beginning of the motion. Your chest and head should be up and handles held with a pronated grip. This will be your starting position.
- Press the handles upward by extending through the elbow.
- After a brief pause at the top, return the weight to just above the start position, keeping tension on the muscles by not returning the weight to the stops until the set is complete.
4. Smith Shoulder Press
92% MatchHow to perform this exercise
- Adjust the seat height and position yourself on the smith machine with your feet shoulder-width apart.
- Grasp the bar with an overhand grip, slightly wider than shoulder-width apart.
- Lift the bar off the rack and position it at shoulder level, with your elbows bent and palms facing forward.
- Press the bar upward until your arms are fully extended overhead.
- Pause for a moment at the top, then slowly lower the bar back down to shoulder level.
5. Smith Machine Overhead Shoulder Press
90.7% MatchHow to perform this exercise
- To begin, place a flat bench (or preferably one with back support) underneath a smith machine. Position the barbell at a height so that when seated on the flat bench, the arms must be almost fully extended to reach the barbell.
- Once you have the correct height, sit slightly in behind the barbell so that there is an imaginary straight line from the tip of your nose to the barbell. Your feet should be stationary. Grab the barbell with the palms facing forward, unlock it and lift it up so that your arms are fully extended. This is the starting position.
- Slowly begin to lower the barbell until it is level with your chin while inhaling.
- Then lift the barbell back to the starting position using your shoulders while exhaling.
- Repeat for the recommended amount of repetitions.
6. Lever Military Press
90.1% MatchHow to perform this exercise
- Adjust the seat height and position yourself on the machine with your back against the backrest.
- Grasp the handles with an overhand grip and position your hands slightly wider than shoulder-width apart.
- Push the handles upward until your arms are fully extended, but do not lock your elbows.
- Pause for a moment at the top, then slowly lower the handles back down to the starting position.
- Repeat for the desired number of repetitions.
7. Smith Standing Behind Head Military Press
89.9% MatchHow to perform this exercise
- Adjust the seat height of the smith machine so that the bar is at shoulder level.
- Stand with your feet shoulder-width apart and your knees slightly bent.
- Grasp the bar with an overhand grip, slightly wider than shoulder-width apart.
- Lift the bar off the rack and step back, maintaining a stable stance.
- Position the bar behind your head, resting on your upper traps.
8. Smith Standing Military Press
89.9% MatchHow to perform this exercise
- Stand with your feet shoulder-width apart and your knees slightly bent.
- Grasp the barbell with an overhand grip, slightly wider than shoulder-width apart.
- Lift the barbell off the rack and bring it down to shoulder level, with your palms facing forward.
- Press the barbell upward until your arms are fully extended overhead.
- Pause for a moment at the top, then slowly lower the barbell back down to shoulder level.
9. Resistance Band Seated Shoulder Press
89.2% MatchHow to perform this exercise
- Sit on a chair or bench with your back straight and feet flat on the ground.
- Hold the resistance band with both hands, palms facing forward, and bring it up to shoulder level.
- Press the band overhead, extending your arms fully.
- Pause for a moment at the top, then slowly lower the band back down to shoulder level.
- Repeat for the desired number of repetitions.
10. Smith Behind Neck Press
88.7% MatchHow to perform this exercise
- Adjust the seat height of the smith machine so that the bar is at shoulder level.
- Stand with your feet shoulder-width apart and your knees slightly bent.
- Grasp the bar with an overhand grip, slightly wider than shoulder-width apart.
- Lift the bar off the rack and step back, maintaining a stable stance.
- Lower the bar down to the back of your neck, keeping your elbows pointing forward.
Why You Might Need a Smith Seated Shoulder Press Alternative
The Smith Seated Shoulder Press depends on one fixed rig, so a busy station or a gym without one rules it out fast. Every alternative presses the weight up from shoulder level to lockout. What changes is the equipment that carries it, whether you sit or stand, and for the two behind-neck versions, whether the bar travels in front of or behind your head. A lever machine and a standard shoulder machine hold you in the same seated position the Smith rig does, guided by different hardware. Set a Smith rig up standing and you get the same pressing motion without the seat. A resistance band swaps the machine for a length of tubing, so it needs only a band and a chair or bench to sit on, letting anyone without machine access do the same pressing motion.
How to Choose the Right Substitute
Check what is free before you choose. A lever machine puts you in the Lever Shoulder Press, which keeps you seated against a backrest pressing handles from shoulder level to lockout, on a path running up and slightly forward. No lever open? The Machine Shoulder (Military) Press or the Leverage Shoulder Press hold you in a similar seated position on standard equipment. If every machine is taken but a Smith rig is free, the Smith Shoulder Press and the Smith Standing Military Press move the same press standing, off a Smith bar gripped wide. The Smith Standing Behind Head Military Press and the Smith Behind Neck Press move the bar behind your head instead of in front. With only a band, the Resistance Band Seated Shoulder Press keeps the seated position and needs just the band and a seat.
Frequently Asked Questions
Can I do the Smith Seated Shoulder Press without a Smith machine?
Yes. A lever machine or a standard shoulder machine holds you in the same seated position the Smith rig gives you, just on different equipment. If neither machine is free, the Resistance Band Seated Shoulder Press keeps the seated position and the pressing motion with a band instead of a fixed bar.
What is the difference between the seated and standing Smith press?
The Smith Seated Shoulder Press has you sit against a pad with your feet flat on the floor while you press. The Smith Shoulder Press and the Smith Standing Military Press move the same press to standing, off a Smith bar with no pad behind you and no seat under you.
Which Smith Seated Shoulder Press alternative needs the least equipment?
The Resistance Band Seated Shoulder Press. It keeps you seated and pressing the same way the Smith machine does, but a band replaces the rig, so it packs up small and works anywhere you have a chair or bench to sit on.
Which alternative suits someone new to a seated press?
The Lever Shoulder Press or the Machine Shoulder (Military) Press. Both sit you down and guide the handles along a fixed path the way the Smith machine does. The Smith Standing Behind Head Military Press and the Smith Behind Neck Press stand you up and run the Smith bar behind your head instead, which is a different setup to manage.
More Exercise Alternatives
Find Alternatives for Any Exercise
Use the exercise substitution finder to compare ranked alternatives for your available equipment and training preference.
Try the Exercise Substitution Finder →