10 Best Barbell Rack Pull Alternatives for Limited Equipment

The Barbell Rack Pull is done standing with a barbell. Ranked closest by our scoring: the Pelvic Tilt Into Bridge, the Reverse Hyper On Flat Bench and the Low Glute Bridge On Floor.

Updated Ranked by our 12-factor similarity model How it works

Original Exercise: Barbell Rack Pull

Barbell Rack PullPlay demonstration
Primary muscle
Glutes
Equipment
Barbell
Difficulty
Intermediate
Type
Compound

Secondary muscles: Hamstrings, Lower Back

How to perform Barbell Rack Pull
  1. Set up a barbell on a rack at knee height.
  2. Stand with your feet shoulder-width apart, toes pointing slightly outwards.
  3. Bend at the hips and knees to lower yourself down and grip the barbell with an overhand grip, hands shoulder-width apart.
  4. Engage your core and lift the barbell by extending your hips and knees, pulling your shoulders back and squeezing your glutes at the top.
  5. Lower the barbell back down to the starting position by bending at the hips and knees.
  6. Repeat for the desired number of repetitions.
Filter Barbell Rack Pull alternatives by your equipmentTell us what you have and we'll hide exercises you can't do.

Quick presets

Equipment you can use
20 more equipment types

Sign in to remember your equipment on every page.

Ranked Barbell Rack Pull Alternatives

10 substitutes, ranked by how closely each one matches the Barbell Rack Pull on movement pattern, muscles worked, equipment and body position. The higher the score, the less you change. Open "How to perform this exercise" on a card for the steps; every card title links to that exercise's own alternatives page.

  1. Best match
    Pelvic Tilt Into BridgePlay demonstration

    1. Pelvic Tilt Into Bridge

    63% match
    • Glutes
    • Bodyweight
    • Beginner
    • Compound

    Use this when you have nothing to train with, because it works the glutes with bodyweight alone.

    How to perform this exercise
    1. Lie on your back with your knees bent and feet flat on the ground.
    2. Place your arms by your sides with your palms facing down.
    3. Engage your glutes and core muscles.
    4. Tilt your pelvis upward, lifting your hips off the ground.
    5. Hold the bridge position for a few seconds.
    6. Slowly lower your hips back down to the starting position.
    7. Repeat for the desired number of repetitions.

    Sets and reps: 3 sets of 8 to 12 reps, and add reps before you add load.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
  2. Reverse Hyper On Flat BenchPlay demonstration

    2. Reverse Hyper On Flat Bench

    63% match
    • Glutes
    • Bodyweight
    • Intermediate
    • Compound
    How to perform this exercise
    1. Lie face down on a flat bench with your hips at the edge and your legs hanging off the bench.
    2. Hold onto the bench for stability.
    3. Keeping your legs straight, raise them up towards the ceiling as high as you can.
    4. Squeeze your glutes at the top of the movement.
    5. Slowly lower your legs back down to the starting position.
    6. Repeat for the desired number of repetitions.

    Sets and reps: 3 or 4 sets of 6 to 10 reps.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying face down, not standing
  3. Low Glute Bridge On FloorPlay demonstration

    3. Low Glute Bridge On Floor

    63% match
    • Glutes
    • Bodyweight
    • Beginner
    • Compound
    How to perform this exercise
    1. Lie flat on your back with your knees bent and feet flat on the ground.
    2. Place your arms by your sides, palms facing down.
    3. Engage your glutes and core, then lift your hips off the ground until your body forms a straight line from your knees to your shoulders.
    4. Pause for a moment at the top, squeezing your glutes.
    5. Slowly lower your hips back down to the starting position.
    6. Repeat for the desired number of repetitions.

    Sets and reps: 3 sets of 8 to 12 reps, and add reps before you add load.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
  4. Reverse Plank With Leg LiftPlay demonstration

    4. Reverse Plank With Leg Lift

    63% match
    • Glutes
    • Bodyweight
    • Intermediate
    • Compound
    How to perform this exercise
    1. Sit on the ground with your legs extended in front of you and your hands resting on the ground behind you, fingers pointing towards your feet.
    2. Press through your hands and lift your hips off the ground, coming into a reverse plank position.
    3. Engage your core and lift one leg off the ground, extending it straight up towards the ceiling.
    4. Hold for a moment, then lower your leg back down.
    5. Repeat with the other leg.
    6. Continue alternating legs for the desired number of repetitions.

    Sets and reps: 3 or 4 sets of 6 to 10 reps.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: inverted, not standing
  5. Glute Bridge Two Legs On BenchPlay demonstration

    5. Glute Bridge Two Legs On Bench

    62% match
    • Glutes
    • Bodyweight
    • Intermediate
    • Compound
    How to perform this exercise
    1. Sit on the edge of a bench with your back against it and your feet flat on the ground.
    2. Place your hands on the bench beside your hips for support.
    3. Engage your glutes and hamstrings, then lift your hips off the bench until your body forms a straight line from your knees to your shoulders.
    4. Pause for a moment at the top, then slowly lower your hips back down to the starting position.
    5. Repeat for the desired number of repetitions.

    Sets and reps: 3 or 4 sets of 6 to 10 reps.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
  6. Rear Decline BridgePlay demonstration

    6. Rear Decline Bridge

    61% match
    • Glutes
    • Bodyweight
    • Intermediate
    • Compound
    How to perform this exercise
    1. Lie on your back with your feet flat on the ground and your knees bent.
    2. Place your arms by your sides with your palms facing down.
    3. Engage your glutes and hamstrings, and lift your hips off the ground until your body forms a straight line from your knees to your shoulders.
    4. Hold this position for a few seconds, then slowly lower your hips back down to the starting position.
    5. Repeat for the desired number of repetitions.

    Sets and reps: 3 or 4 sets of 6 to 10 reps.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
  7. Single Leg Glute Bridge

    7. Single Leg Glute Bridge

    61% match
    • Glutes
    • Bodyweight
    • Intermediate
    • Isolation

    Pick this when you want an easier single-leg version that still works the glutes.

    How to perform this exercise
    1. Lay on the floor with your feet flat and knees bent.
    2. Raise one leg off of the ground, pulling the knee to your chest. This will be your starting position.
    3. Execute the movement by driving through the heel, extending your hip upward and raising your glutes off of the ground.
    4. Extend as far as possible, pause and then return to the starting position.

    Sets and reps: 3 sets of 10 to 15 reps on each side.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
  8. Bench Hip ExtensionPlay demonstration

    8. Bench Hip Extension

    60% match
    • Glutes
    • Bodyweight
    • Beginner
    • Compound
    How to perform this exercise
    1. Sit on a bench with your back against the bench and your feet flat on the ground.
    2. Place your hands on the bench for support.
    3. Engage your glutes and hamstrings, then lift your hips off the bench until your body forms a straight line from your knees to your shoulders.
    4. Pause for a moment at the top, then slowly lower your hips back down to the starting position.
    5. Repeat for the desired number of repetitions.

    Sets and reps: 3 sets of 8 to 12 reps, and add reps before you add load.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
    • Balance: easier to stay steady on than the Barbell Rack Pull
  9. Butt Lift (Bridge)

    9. Butt Lift (Bridge)

    60% match
    • Glutes
    • Bodyweight
    • Beginner
    • Compound
    How to perform this exercise
    1. Lie flat on the floor on your back with the hands by your side and your knees bent. Your feet should be placed around shoulder width. This will be your starting position.
    2. Pushing mainly with your heels, lift your hips off the floor while keeping your back straight. Breathe out as you perform this part of the motion and hold at the top for a second.
    3. Slowly go back to the starting position as you breathe in.

    Sets and reps: 3 sets of 8 to 12 reps, and add reps before you add load.

    Why this matches
    • Primary muscle: glutes, the same as the Barbell Rack Pull
    • Equipment: bodyweight only, not free weights
    • Body position: lying on your back, not standing
  10. Linear Acceleration Wall Drill

    10. Linear Acceleration Wall Drill

    58% match
    • Hamstrings
    • Bodyweight
    • Intermediate
    • Compound
    How to perform this exercise
    1. Lean at around 45 degrees against a wall. Your feet should be together, glutes contracted.
    2. Begin by lifting your right knee quickly, pausing, and then driving it straight down into the ground.
    3. Switch legs, raising the opposite knee, and then attacking the ground straight down.
    4. Repeat once more with your right leg, and as soon as the right foot strikes the ground hammer them out rapidly, alternating left and right as fast as you can.

    Sets and reps: 3 or 4 sets of 6 to 10 reps on each side.

    Why this matches
    • Primary muscle: hamstrings, not glutes
    • Equipment: bodyweight only, not free weights
    • Body position: standing, the same as the Barbell Rack Pull

Barbell Rack Pull FAQ

What is the best bodyweight alternative to Barbell Rack Pull?

The single-leg glute bridge is the top bodyweight substitute for isolating the glutes while minimizing spinal load. Lie on your back, drive one foot into the floor, lift the hips to full extension, and squeeze the glute at the top while preventing lumbar hyperextension.

Find Alternatives for Any Exercise

Search the exercise database and filter the ranked substitutes by the equipment you own.

Similarity scores compare exercise metadata such as movement pattern, muscles, equipment and body position. They are not a safety rating or a check that you own the equipment. Learn about our methodology